GM Tech-2(CANdi & TIS)

Description:

The Tech-2 is the same tester GM Technicians use to diagnose GM

 vehicles. The Vetronix Tech 2 comes with Authentic GM software and

 provides support for on-board diagnostics on all GM systems 1992 thru 2007

Features:

Authentic GM software in the Tech 2 Flash means the most comprehensive

 diagnostic software available for late model GM vehicles.

Support for on-board diagnostics on all GM systems 1992 thru current year.

Removable hardware modules provide insurance against scan tool obsolescence. Large, easy-to-read backlit screen. RS232 & RS485 ports provide the avenue to connect

future devices to your Tech 2 Flash. Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review. Ability to view the status of vehicle diagnostic tests as they run.Bi-directionalThe authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.

Vetronix Tech 2 Specifications

Dimensions: 12??

Microprocessor: 32 bit, 16 MHz

Memory: 32 MB flash type II PCMCIA. Type III slot available for future expansion.

Communications: Integral RS232 communication port.

Screen: 3.8?.8 backlit monochrome with full graphics capability: 320?40

       pixels. Displays up to 9 vehicle parameters at once

GM aftermarket Expertec TIS software on CD-ROM disks

Hardware lock to open SPS programming in TIS 2000

RS232 cable and user's manual.

Data/Sensor/Trouble Code Manual

DLC Cable, DLC Loopback Adapter

12V Cigarette Lighter Power Cable

SAE 16/19 Adapter

NAO 12/19 Adapter

Battery Power Cable

Tech-2 Users Manual download ( 3.9 Mb )

Tech-2 Flash Registration Card

An industry change in protocol from OBD II to Controller Area Network (CAN)

has begun. In order to perform diagnostics on a vehicle that uses the CAN

interface; you will need the Tech 2 Flash and a CAN diagnostic interface

module. The module connects between the Tech 2 Flashs diagnostic link

cable and the OBD adapter. Once the module is connected, it can be used

on all GM vehicle applications, even those vehicles using other platforms

such as OBD I and OBD II.

The following GM vehicles utilize the CAN interface:

05 Buick Allure (3.6L)

05 Buick LaCrosse (3.6L)

05 Buick Rainier (5.3L)

04-05 Buick Rendezvous (3.6L)

04-05 Cadillac CTS (3.6L)

04-05 Cadillac SRX (3.6L / 4.6L)

04-05 Cadillac XLR (4.6L)

05 Cadillac STS (3.6L / 4.6L)

05 Chevrolet Cobalt (2.2L)

05 Chevrolet Corvette (6.0L)

05 Chevrolet Equinox (3.4L)

05 Chevrolet TrailBlazer (5.3L)

05 Chevrolet SSR (6.0L)

04 Chevrolet Malibu (Body/Chassis only)

05 Chevrolet Malibu (3.5L)

05 GMC Envoy (5.3L)

05 Pontiac G6 (3.5L)

05 Pontiac GTO (6.0L)

05 Pontiac Pursuit (2.2L)

Description:

The Tech-2 is the same tester GM Technicians use to diagnose GM

 vehicles. The Vetronix Tech 2 comes with Authentic GM software and

 provides support for on-board diagnostics on all GM systems 1992 thru 2007

Features:

Authentic GM software in the Tech 2 Flash means the most comprehensive

 diagnostic software available for late model GM vehicles.

Support for on-board diagnostics on all GM systems 1992 thru current year.

Removable hardware modules provide insurance against scan tool obsolescence. Large, easy-to-read backlit screen. RS232 & RS485 ports provide the avenue to connect

future devices to your Tech 2 Flash. Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review. Ability to view the status of vehicle diagnostic tests as they run.Bi-directionalThe authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.

Vetronix Tech 2 Specifications

Dimensions: 12??

Microprocessor: 32 bit, 16 MHz

Memory: 32 MB flash type II PCMCIA. Type III slot available for future expansion.

Communications: Integral RS232 communication port.

Screen: 3.8?.8 backlit monochrome with full graphics capability: 320?40

       pixels. Displays up to 9 vehicle parameters at once

GM aftermarket Expertec TIS software on CD-ROM disks

Hardware lock to open SPS programming in TIS 2000

RS232 cable and user's manual.

Data/Sensor/Trouble Code Manual

DLC Cable, DLC Loopback Adapter

12V Cigarette Lighter Power Cable

SAE 16/19 Adapter

NAO 12/19 Adapter

Battery Power Cable

Tech-2 Users Manual download ( 3.9 Mb )

Tech-2 Flash Registration Card

An industry change in protocol from OBD II to Controller Area Network (CAN)

has begun. In order to perform diagnostics on a vehicle that uses the CAN

interface; you will need the Tech 2 Flash and a CAN diagnostic interface

module. The module connects between the Tech 2 Flashs diagnostic link

cable and the OBD adapter. Once the module is connected, it can be used

on all GM vehicle applications, even those vehicles using other platforms

such as OBD I and OBD II.

The following GM vehicles utilize the CAN interface:

05 Buick Allure (3.6L)

05 Buick LaCrosse (3.6L)

05 Buick Rainier (5.3L)

04-05 Buick Rendezvous (3.6L)

04-05 Cadillac CTS (3.6L)

04-05 Cadillac SRX (3.6L / 4.6L)

04-05 Cadillac XLR (4.6L)

05 Cadillac STS (3.6L / 4.6L)

05 Chevrolet Cobalt (2.2L)

05 Chevrolet Corvette (6.0L)

05 Chevrolet Equinox (3.4L)

05 Chevrolet TrailBlazer (5.3L)

05 Chevrolet SSR (6.0L)

04 Chevrolet Malibu (Body/Chassis only)

05 Chevrolet Malibu (3.5L)

05 GMC Envoy (5.3L)

05 Pontiac G6 (3.5L)

05 Pontiac GTO (6.0L)

05 Pontiac Pursuit (2.2L)